EEStor Reveals Results of Multilayer Ceramic Capacitor Tests

October 23, 2018

EEStor Corporation

Toronto, Ontario, Canada

(TSXV: ESU)

 

EEStor Reveals Results of Multilayer Ceramic Capacitor Tests  

  • Results show EEStor’s proprietary Composition Modified Barium Titanate (CMBT) powder can be utilized in the Multilayer Ceramic Capacitors (MLCC) process
  • Producing dielectrics with a relative dielectric constant of over 30,000, which is significantly higher than equivalent technologies

 

Toronto, Ontario – October 23, 2018 – EEStor Corporation (“EEStor” or the “Company“) (TSXV:ESU) a developer of high energy density, solid-state capacitor technology, today announced the results of independent third party production and performance testing of Multilayer Ceramic Capacitors (MLCCs), made with EEStor’s proprietary Composition Modified Barium Titanate (CMBT) powder.

 

In a first for the MLCC industry, EEStor’s CMBT powder has been used to create densified ceramic layers and Multilayer Ceramic Capacitors using standard Multilayer Ceramic Capacitor processes.

 

During production tests, EEStor’s CMBT was used to create MLCC devices and densified layers with high relative permittivity, high insulation resistance and low dissipation and predicted long lifespan. The test results demonstrate that EEStor’s high permittivity CMBT powder is not only compatible with standard MLCC manufacturing techniques, it can also be used to create superior performing and long lasting MLCC devices.

 

Test methods

Densified ceramic layers without electrodes called “K-squares”, as well as a small production lot of size .0805 MLCCs, were manufactured by MRA Laboratories through MRA’s standard MLCC processes, utilizing EEStor produced CMBT powders. Testing to characterize these densified ceramic layers and MLCC capacitors was completed by Intertek, MRA and Radiant Technology.

 

Results

The latest tests carried out between August and September of 2018 by Radiant, MRA and Intertek, demonstrated that MLCC techniques can produce a lead-free relaxor dielectric material, with a very high relative permittivity of over 30,000, alongside low residual polarization, high insulation resistance and low dissipation.

 

In addition, Highly Accelerated Life Testing (HALT) predicts a long expected lifespan for the produced MLCCs, with 20 out of 20 units passing HALT tests with an average of 1 tera-ohm resistance after 100 hours at 180˚C.

 

The EEStor MLCCs meet Electronic Industries Alliance (EIA) RS-198 Standards for X7V and Y5V thermal performance criteria. This demonstrates EEStor’s high permittivity CMBT powder is compatible with standard MLCC manufacturing techniques.

 

The relevant third-party testing reports and a White Paper with a detailed analysis of the results can be found at:

 

About EEStor Corporation

EEStor is a developer of high energy density solid-state capacitor technology utilizing the Company’s patented Composition Modified Barium Titanate (CMBT) material.  The Company is focused on licensing opportunities for its technology across a broad spectrum of industries and applications.

The Company’s success depends on the commercialization of its technology.  There is no assurance that EEStor will be successful in the licensing of the technology. Readers are directed to the “Risk Factors” disclosed in the Company’s public filings.

 

Ian Clifford

Chief Executive Officer

EEStor Corporation

Tel. 416-535-8395 ext. 3

Ian.Clifford@EEStorCorp.com                  

 

Nick Jones

Vice President

Sparkpr

Tel. 00447832115362

nick.jones@sparkpr.com

 

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

 

Back to Press